LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 639 (Exterior Lighting) >> Diagnosis And Testing >> Headlamps >> Pinpoint Tests >> Pinpoint Test D: One High Beam Headlamp Is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

When the smart junction box (SJB) detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the HIGH BEAM position, the SJB sends voltage through circuit CLS08 (VT/GN) to the high beam headlamps. Ground is supplied on circuit GD121 (BK/YE) and circuit GD123 (BK/GY) for the LH and RH high beam headlamps, respectively.

scientia non olet · About LEMON Manuals