Normal Operation
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
When the headlamp switch is placed in the HEADLAMPS ON position, the smart junction box (SJB) monitors the high beam request circuit from the multifunction switch through circuit CLF17 (WH/OG). When the multifunction switch is placed in the HIGH BEAM position, the signal is routed to ground through circuit GD116 (BK/VT). The SJB then supplies voltage to the high beam headlamps through circuit CLS08 (VT/GN).