LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (Brake System - General Information) >> Diagnosis And Testing >> Brake System >> Pinpoint Tests >> Pinpoint Test A: Vibration When Brakes Are Applied >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

During moderate to heavy braking, noise from the hydraulic control unit (HCU) and pulsation in the brake pedal can be observed. Pedal pulsation coupled with noise during heavy braking or on loose gravel, bumps, wet or snowy surfaces is acceptable and indicates correct functioning of the anti-lock brake system (ABS). Pedal pulsation alone or steering wheel nibble when the brakes are applied (frequency is proportional to the vehicle speed) indicates a concern with a brake or suspension component.