LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 578 (Instrument Cluster And Panel Illumination) >> Removal And Installation >> Selector Lever Indicator Bulb >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission selector lever bezel. For additional information, refer to REMOVAL .
  2. Remove the selector lever indicator bulb socket and the bulb.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals