LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 561 (Exterior Trim And Ornamentation) >> Removal And Installation >> Radiator Grille - Freestyle >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the 4 scrivets
  3. Remove the 2 radiator grille upper bolts.
    • To install, tighten to 6 N.m (53 lb-in).
  4. Remove the 2 radiator grille screws.
  5. Remove the 2 hood bumpers.
  6. Remove the radiator grille.
    • Release the 4 retaining tabs from the bumper cover.
    • Pull upward on the radiator grille to remove it from the bumper cover.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals