LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Ajar Switch - Front Door >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door lock actuator. For additional information, refer to FRONT DOOR LOCK ACTUATOR .
  2. Insert a screwdriver or suitable tool into the opening on the door latch and push up on the tab.
    • Turn the door ajar switch clockwise to remove.
    Fig 1: Locating Door Ajar Switch
    G04659058Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.