LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Rear Drive Axle/Differential) >> Removal And Installation >> Rear Axle Housing Support Insulator >> Removal

Rear Axle Housing Support Insulator: Removal

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the axle assembly. For additional information, refer to AXLE ASSEMBLY  .
  2. Using the special tool, remove the rear axle housing support insulator.
    Fig 1: Identifying Special Tool (1 Of 2)
    G04655411Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals