LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Rear Drive Axle/Differential) >> Removal And Installation >> Differential Support Insulator >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the axle assembly. For additional information, refer to AXLE ASSEMBLY  .
  2. Remove the differential support insulators from the subframe.
  3. To install reverse the removal procedure.
scientia non olet · About LEMON Manuals