LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 530 (HVAC Control System) >> Removal And Installation >> Temperature Blend Door Actuator - LH >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The LH temperature blend door actuator can be accessed from below the LH side of the instrument panel.
  1. Remove the 3 LH temperature blend door actuator screws.
  2. Disconnect the LH temperature blend door actuator.
  3. Remove the LH temperature blend door actuator.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals