LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 530 (HVAC Control System) >> Removal And Installation >> Blower Motor Resistor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH lower instrument panel insulator.
  2. Disconnect the blower motor resistor electrical connector.
  3. Remove the 2 blower motor resistor screws.
  4. Remove the blower motor resistor.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals