LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 489 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Interior Door Handle - Rear, Crew Cab >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Position the watershield aside.
  3. Release the 2 clips and release the interior rear door handle cover.
    Fig 1: Releasing Interior Rear Door Handle Cover
    G04646465Courtesy of FORD MOTOR CO.
  4. Remove the 2 nuts and the interior door handle.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals