LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Module Communications Network -- F250-F550 Super Duty) >> Diagnosis And Testing >> Communications Network >> Principles of Operation >> International Standards Organization (ISO) 9141 Communications Network

International Standards Organization (ISO) 9141 Communications Network

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The ISO 9141 communications network is a single circuit communications network, circuit 70 (LB/WH). The ISO 9141 communications network does not permit intermodule communication. When the diagnostic tool communicates to modules on the ISO 9141 communications network, the diagnostic tool must request all information or initiate module commands. The ISO 9141 communications network is a communications network used for the four-wheel drive (4WD) control module, the parking aid module and the restraint control module (RCM) communications. The ISO 9141 communications network does not function if the circuit is shorted to ground or voltage. Also, if one of the modules on the ISO 9141 communications network loses power or shorts internally, communications to that module fail.