LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 480 (Exterior Lighting System) >> Diagnosis And Testing >> Turn Signal and Hazard Lamps >> Pinpoint Tests >> Pinpoint Test M: The Hazard Lamps Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The electronic flasher receives voltage from the central junction box (CJB) fuse 18 (20A) through circuit 10 (LG/RD). Voltage is then routed to the multifunction switch through circuit 385 (WH/RD) (hazard lamps) and circuit 44 (LB) (turn lamps). When the hazard switch is activated, voltage is routed to all of the turn lamps. The electronic flasher receives ground through circuit 57 (BK).

scientia non olet · About LEMON Manuals