LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 480 (Exterior Lighting System) >> Diagnosis And Testing >> Stoplamps >> Pinpoint Tests >> Pinpoint Test J: The Stoplamps Are On Continuously >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

When the brake pedal is applied, voltage is routed to the high mounted stoplamp, the trailer brake module and the multifunction switch through circuit 511 (LG). The multifunction switch then routes the voltage to the rear lamps through circuit 9 (LG/OG) (LH rear lamp) and circuit 5 (OG/LB) (RH rear lamp).

scientia non olet · About LEMON Manuals