LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Instrument Cluster System) >> Diagnosis And Testing >> Instrument Cluster >> Pin Point Tests >> Pin Point Test O: The High Beam Indicator Is Never On >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The high beam indicator bulb receives voltage through circuit 12 (LG/BK) when the multifunction switch is placed in the high beam position. The high beam indicator bulb is grounded through the instrument cluster bulb ground circuit 57 (BK).

scientia non olet · About LEMON Manuals