LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 403 (Automatic Transmission External Controls - Cd4E) >> Diagnosis And Testing >> External Controls >> Pinpoint Test >> Pinpoint Test B: The Shift Control Is Out Of Correct Gear Relationship

Pinpoint Test B: The Shift Control Is Out Of Correct Gear Relationship

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. B1 CHECK THE SHIFT CONTROL LINKAGE 
    • Key in ON position.
    • Depress the brake pedal.
    • Gain access to the shift control linkage.
    • Actuate the selector lever in all gearshift positions.
    • Observe all linkages during operation.
    • Is the linkage damaged? 

    Yes  : INSTALL new shift control linkage. TEST the system for normal operation.

    No  : GO to B2.

  2. B2 CHECK THE SELECTOR LEVER CABLE 
    • Check the selector lever cable and bracket installation.
    • Is the selector lever cable installed correctly and adjusted? 

    Yes  : VERIFY that the transmission range (TR) sensor is correctly adjusted. REFER to AUTOMATIC TRANSAXLE-TRANSMISSION - CD4E . TEST the system for normal operation.

    No  : ADJUST or INSTALL a new selector lever cable as necessary.

scientia non olet · About LEMON Manuals