LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 386 (Exterior Lighting System) >> Diagnosis And Testing >> Stoplamps >> Pinpoint Tests >> Pinpoint Test J: The Stoplamps Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The stoplamp switch is supplied battery voltage through circuit 10 (LG/RD) from the smart junction box (SJB). When the brake pedal is applied, the stoplamp switch allows voltage to flow through circuit 511 (LG). Circuit 511 (LG) sends voltage to the high mounted stoplamp and SJB, which in turn provides voltage to the LH and RH rear lamps.

scientia non olet · About LEMON Manuals