LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Accessory Drive System - 2.3L - (Hybrid)) >> Removal And Installation >> Accessory Drive Belt >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt.
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals