LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Supplemental Inflatable Restraint System) >> Diagnosis And Testing >> Diagnostic Instructions - Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> PID/Data Monitor and Record

PID/Data Monitor and Record

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

The PID/Data Monitor and Record option allows the diagnostic tool operator to read the state of several parameter IDs (PIDs) to aid in diagnosing the system. PIDs are real time measurements of parameters such as voltages and resistances, calculated by the RCM and sent to the diagnostic tool for display. Many of the PIDs supported by the RCM are calculated periodically and are, therefore, not true real time readings.

To retrieve PIDs, follow these steps:

  1. Connect the diagnostic tool to the data link connector (DLC).
  2. Turn the ignition switch to the ON position.
  3. Follow the manufacturer's instructions for the diagnostic tool being used.
  4. Record all PIDs that are to be retrieved and initiate PID retrieval. PIDs are updated continuously on the display.
scientia non olet · About LEMON Manuals