LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 285 (Exterior Lighting System) >> Diagnosis And Testing >> Stoplamps >> Pinpoint Tests >> Pinpoint Test J: The Stoplamps Are On Continuously >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

When the brake pedal is applied, the stoplamp switch routes voltage to the central junction box (CJB) fuse 28 (10A) and fuse 30 (15A) through circuit 10 (LG/RD). The CJB fuse 28 (10A) routes the voltage to the high mounted stoplamp through circuit 569 (DG). The CJB fuse 30 (15A) routes the voltage to the multifunction switch through circuit 511 (LG). The multifunction switch then routes the voltage through circuits 9 (LG/OG) and 5 (OG/LB) to the LH and RH rear lamps, respectively.

scientia non olet · About LEMON Manuals