LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 225 (Engine Controls - Diagnostic Subroutines -- 6.0L (99P F450/550) Diesel) >> Hard Start/No Start Diagnostic Procedures >> 10d. Check the RPM Signal While Cranking >> Purpose: >> Diagnostic Tool - Data List Monitoring

Diagnostic Tool - Data List Monitoring

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: You may need to use an outside power source for the diagnostic tool.
DIAGNOSTIC TOOL PARAMETER LIST AND MONITOR SPECIFICATION

Parameter Specification Measurement
RPM (1) 100 RPM minimum  
(1) Low RPM may be caused by starting or charging system concerns. No RPM indicated while cranking may be a CKP fault.