Diagnostic Tool - Data List Monitoring

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford RV Cutaway, 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

The diagnostic tool may reset below 9.5 volts.
Select the parameters indicated from the diagnostic tool parameter list and monitor while cranking the engine.

NOTE: You may need to use an outside power source for the diagnostic tool.

DIAGNOSTIC TOOL PARAMETER LIST AND MONITOR SPECIFICATION

Parameter

Specification

Measurement

FICMLPWR ⁽¹⁾

8 volts minimum

FICMVPWR ⁽²⁾

8 volts minimum

⁽¹⁾	No or low voltage indicated could be caused by a 12-way connector issue or logic power fuse. GO to Pinpoint Test S .

⁽²⁾	No or low voltage indicated could be caused by a 12-way connector issues.