LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 194 (Instrument Cluster And Panel Illumination) >> Removal And Installation >> Selector Lever Indicator Bulb >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission selector lever bezel. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION EXTERNAL CONTROLS .
  2. Remove the selector lever indicator bulb socket and the bulb.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals