LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1916 (Engine Controls - Powertrain DTC Charts & Descriptions - DTC P0600 Through DTC P164A - (Except Diesel & Hybrid)) >> DTC P1633: Keep Alive Power (KAPWR) Voltage Too Low

DTC P1633: Keep Alive Power (KAPWR) Voltage Too Low

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P1633 - KEEP ALIVE POWER (KAPWR) VOLTAGE TOO LOW

Description:  Indicates the KAPWR circuit has experienced a voltage interrupt.
Possible Causes: 
  • Open KAPWR circuit
  • Intermittent KAPWR
Diagnostic Aids:  Loss of KAPWR to the powertrain control module (PCM) results in immediate malfunction indicator lamp (MIL) illumination and sets DTC P1633.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST QB .
scientia non olet · About LEMON Manuals