LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1903 (Pinpoint Test Hf: Catalyst Efficiency Monitor And Exhaust Systems Through Pinpoint Test HX: Evaporative Emission (EVAP) Monitor And System - (Except Diesel & Hybrid)) >> Pinpoint Test HV: Cooling Fan Clutch >> Introduction >> Powertrain Control Module (PCM) Connector

Powertrain Control Module (PCM) Connector

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Milan, and 2006 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.

For PCM connector views or reference values, refer to REFERENCE VALUES .

POWERTRAIN CONTROL MODULE CONNECTOR PINS AND CIRCUITS REFERENCE

Pin Circuit
B35, B36 VPWR (Vehicle Power)
E24 FSS (Fan Speed Sensor)
B47, B48, B49, B50 PWRGND (Power Ground)
E20 VBPWR (Vehicle Buffered Power)
E7 FCV (Fan Control Variable)