LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1901 (Engine Controls - Pinpoint Test DK: Accelerator Pedal Position (App) Sensor Through Pinpoint Test DW: Heated Oxygen Sensor (Ho2S) - (Except Diesel & Hybrid)) >> Pinpoint Test DW: Heated Oxygen Sensor (Ho2S) >> Introduction >> Notes

Pinpoint Test DW: Heated Oxygen Sensor (Ho2S): Introduction: Notes

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Milan, and 2006 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: CROWN VICTORIA POLICE INTERCEPTOR VEHICLES EQUIPPED WITH FIRE SUPPRESSION SYSTEM, REFER TO FIRE SUPPRESSION SYSTEM FOR IMPORTANT SAFETY WARNINGS . FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
WARNING: WHILE CONDUCTING TESTS ON A HOT ENGINE TAKE ALL SAFETY PRECAUTIONS TO PREVENT SKIN CONTACT WITH HOT ENGINE COMPONENTS. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

This pinpoint test is intended to diagnose the following:

Fig 1: Heated Oxygen Sensor (HO2S) Connector
G04587192Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals