Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
All radiator grilles
- Remove the front bumper cover. For additional information, refer to
BUMPER SYSTEM -- FUSION, MILAN & MKZ
article.
Upper radiator grille
- Remove the 6 upper radiator grille screws.
- Remove the upper radiator deflector.
- Remove the upper radiator grille.
Lower radiator grille
- Pull outward to remove the lower radiator grille moulding.
- Remove the lower center radiator grille.
- Remove the lower center radiator grille from the clips on the bumper cover.
- Remove the lower center radiator grille from the bumper cover.
All radiator grilles
- To install, reverse the removal procedure.