LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Seat System) >> Diagnosis And Testing >> Seats >> Pinpoint Tests >> Pinpoint Test O: The Driver Heated Seat Is Inoperative - Seat Does Heat But The Heated Seat Indicator Does Not Illuminate >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

Upon receiving a signal from the electronic automatic temperature control (EATC) module, the heated seat module will decrease one setting (the sequence is HI, LO, OFF, HI, etc.). When a heated seat is set to HI, both LED indicators above the heated seat control button will illuminate. When a heated seat is set to LO, only the left LED indicator will illuminate. When a heated seat is set to OFF, neither LED will be illuminated.

scientia non olet · About LEMON Manuals