LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1853 (Evaporative Emissions System (Except Hybrid)) >> Removal And Installation >> Fuel Vapor Tube Assembly - All Wheel Drive (AWD) >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S)

G07785753
Fuel Storage Tanker
164-R3202 or equivalent
G07785754
Powertrain Lift
300-OTC1585AE or equivalent
Fig 1: Exploded View Of Fuel Vapor Tube Assembly Components With Torque Specifications (AWD)
G07785755Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION

Item Part Number Description
1 9002 Fuel tank
2 9092 Fuel tank strap (2 required)
3 9C052 Fuel Tank Pressure (FTP) sensor (part of 9A228)
4 - Retainer clip (part of 9A228) (3 required)
5 - Fuel vapor tube assembly-to-fuel tank quick connect coupling (part of 9A228)
6 W505444 Fuel tank strap bolt (4 required)
7 9A228 Fuel vapor tube assembly
8 14A464 FTP sensor electrical connector
9 - Fuel tank filler pipe hose (part of 9034)
10 W525937 Fuel tank filler pipe hose clamp
11 - Fuel vapor tube assembly-to-Evaporative Emission (EVAP) canister quick connect coupling (part of 9A228)
12 9G676 Fuel vapor separator and solenoid assembly (part of 9E857)
13 9E857 EVAP canister assembly
14 - Fuel vapor tube assembly-to-recirculation tube quick connect coupling (part of 9A228)
15 - Fuel tank filler pipe recirculation tube (part of 9034)
16 9034 Fuel tank filler pipe
17 5411268 Fuel tank filler pipe heat shield
18 W707142 Fuel tank filler pipe heat shield nut (3 required)