LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1828 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Exterior Door Handle >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the grommet from the rear of the door.
  2. Loosen, but do not remove the exterior door handle bezel retaining screw and remove the exterior door handle bezel.
    3. NOTE: Pull the exterior door handle outward and to the rear to release it from the exterior door handle reinforcement.
  3. Remove the exterior door handle.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals