LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1819 (Electronic Engine Controls - 3.0L (4V)) >> Removal And Installation >> Knock Sensor (KS) >> Cylinder-Head Mounted Knock Sensor (KS)

Cylinder-Head Mounted Knock Sensor (KS)

WARNING: This page is about a different car, the 2011 Mercury Milan and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cylinder Head-Mounted Knock Sensor (KS) Replacement Components With Torque Specifications
G06096784Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION

Item Part Number Description
1 14A464 Knock Sensor (KS) electrical connector
2 W500310 KS bolt
3 12A699 KS

Cylinder-Block Mounted Knock Sensor (KS) 

Fig 2: Cylinder-Block Mounted Knock Sensor (KS) Replacement Components With Torque Specifications
G06096785Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION

Item Part Number Description
1 14A464 Knock Sensor (KS) electrical connector
2 W500310 KS bolt
3 12A699 KS
scientia non olet · About LEMON Manuals