LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (Exterior Trim And Ornamentation) >> Removal And Installation >> Door Moulding - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the front door retaining clips.
    • Start at the rear lower portion of the front door moulding, moving forward along the front door.
      Fig 1: Identifying Front Door Moulding
      G03988624Courtesy of FORD MOTOR CO.
  2. Remove the front door moulding.
  3. To install, reverse the removal procedure.
    • It is necessary to install new front fender moulding retaining clips anytime the front door moulding is removed.
scientia non olet · About LEMON Manuals