LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Exterior Lighting System) >> Diagnosis And Testing >> Reversing Lamps >> Pinpoint Tests >> Pinpoint Test Y: An Individual Reversing Lamp Is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

When the transmission control module (TCM) detects the transmission in REVERSE, a signal is sent to the smart junction box (SJB) over the communication network. The SJB then provides voltage to the reversing lamps through circuit 1367 (WH/YE). Ground for the reversing lamps is provided through circuit 1205 (BK).