Removal And Installation
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the 12 pin-type retainers and the luggage compartment lid trim panel.
- Disconnect the 3 electrical connectors and position the wiring harness aside.
- Remove the 2 luggage compartment lid hinge covers.
- Remove the 4 bolts and the luggage compartment lid.
- To install, tighten to 6 Nm (53 lb-in).
- To install, reverse the removal procedure.
- Adjust the luggage compartment lid. For additional information, refer to Luggage Compartment Lid Alignment .