LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1708 (Accessory Drive System) >> Removal & Installation >> Accessory Drive Belt Tensioner >> Removal

Accessory Drive Belt Tensioner: Removal

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accessory drive belt. For additional information, refer to ACCESSORY DRIVE BELT .
  2. Remove the bolt and the accessory drive belt tensioner.
    3. Fig 1: Accessory Drive Belt Tensioner
    GF0013749Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals