LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1691 (Exterior Lighting System) >> Diagnostic Tests >> Stoplamps >> Pinpoint Tests >> Pinpoint Test H: The Stoplamps Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

The battery junction box (BJB) supplies voltage to the stoplamp switch through circuit 1119 (RD). When the brake pedal is applied, the stoplamp switch routes voltage to the stoplamps through circuit 10 (LG/RD).

This pinpoint test is intended to diagnose the following: