LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Interior Door Handle >> Installation

Interior Door Handle: Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the interior door handle and connect the interior door handle actuating cable.
  2. Position the interior door handle and loosely install the bolt.
  3. Install the door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  4. Center the inside door handle alignment pins to the front door trim panel and tighten the interior door handle bolt to 7 Nm (62 lb-in).
scientia non olet · About LEMON Manuals