LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Lock Actuator >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door latch. For additional information, refer to FRONT DOOR LATCH .
  2. Remove the door lock actuator from the latch.
  3. To install, reverse the removal procedure.