LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Rear Drive Axle/Differential) >> Removal And Installation >> Rear Axle Housing Support Insulator >> Installation

Rear Axle Housing Support Insulator: Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, install the rear axle housing support insulator.
    Fig 1: Installing Rear Axle Housing Support Insulator
    G03988417Courtesy of FORD MOTOR CO.
  2. Install the axle assembly. For additional information, refer to AXLE ASSEMBLY .