Removal and Installation
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
All radiator grilles
- Remove the front bumper cover. For additional information, refer to BUMPER COVER -- FRONT
.
Upper radiator grille
- Remove the 6 upper radiator grille screws.
- Remove the upper radiator deflector.
- Remove the upper radiator grille.
Lower radiator grille
- Pull outward to remove the lower radiator grille molding.
- Remove the lower center radiator grille.
- Remove the lower center radiator grille from the clips on the bumper cover.
- Remove the lower center radiator grille from the bumper cover.
All radiator grilles
- To install, reverse the removal procedure.