Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear interior lamp lens.

Fig 1: Locating Interior Lamp Lens
Courtesy of FORD MOTOR CO.
Release the 2 retaining clips (through the access holes) and remove the rear interior lamp assembly.
- Disconnect the electrical connector.
Fig 2: Locating Interior Lamp Retaining Clips
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.