LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1539 (Evaporative Emissions System (Hybrid)) >> Removal And Installation >> Evaporative Emission Canister >> Notes

Evaporative Emission Canister: Notes

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Evaporative Emission Canister Replacement Components With Torque Specifications
G06272529Courtesy of FORD MOTOR CO.
PART NUMBER DESCRIPTION TABLE

Item Part Number Description
1 W708029 Evaporative Emission (EVAP) canister bolt (2 required)
2 W713475 EVAP  canister nut (2 required)
3 14A464 EVAP  canister vent solenoid electrical connector
4 - Fresh air tube (part of 9034)
5 - Vapor tube-to- EVAP  canister quick connect coupling (part of 9J279)
6 - Vapor tube-to- EVAP  canister quick connect coupling (part of 9A228)
7 9E857 EVAP  canister