LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1506 (Engine Cooling System (Except Hybrid)) >> Removal And Installation >> Cooling Fan Motor and Shroud - 3.5L >> Cooling Fan Motor and Shroud (View 1 Of 2)

Cooling Fan Motor and Shroud (View 1 Of 2)

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cooling Fan Motor & Shroud Replacement Components With Torque Specifications
G06272331Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION TABLE

Item Part Number Description
1 - RH lower radiator hose pin-type retainer (part of 8B273)
2 8B273 Lower radiator hose
3 256844 Transmission fluid cooler tube retaining clips (part of 7R081)
4 13A506 Block heater retainers (part of 6B018)
5 14A099 Wire harness retainers (part of 14290)
6 14A099 Wire harness retainer (part of 14290)
7 14A099 Wire harness shield retainers (part of 14290)
8 14A099 Wire harness shield retainer (part of 14290)
9 14A464 Cooling fan module electrical connector (part of 14290)
10 - Cooling fan module electrical connectors (part of 8C607)
11 - Cooling fan module bolt
12 - Cooling fan module