LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1499 (Electronic Engine Controls (Hybrid)) >> Removal And Installation >> Heated Oxygen Sensor (HO2S) and Catalyst Monitor Sensor - Exploded View

Heated Oxygen Sensor (HO2S) and Catalyst Monitor Sensor - Exploded View

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Heated Oxygen Sensor (HO2S) & Catalyst Monitor Sensor Replacement Components
G06272558Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION TABLE

Item Part Number Description
1 14A464 Heated Oxygen Sensor (HO2S) electrical connector (part of 12C508)
2 9F472 HO2S 
3 9G444 Catalyst Monitor Sensor (CMS)
4 14A464 CMS  electrical connector (part of 12C508)
  1. For additional information, refer to the appropriate procedure(s).