Normal Operation
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
When the brake pedal is applied, the stoplamp switch routes voltage to the LH and RH rear stoplamps (Milan and MKZ), the Smart Junction Box (SJB), the high mounted stoplamp and the PCM.
For Fusion, when the SJB detects the brake pedal is applied, the SJB provides voltage to the LH and RH rear stoplamps.
- DTC B1485 (Brake Pedal Input Short to Battery) - an on-demand DTC that sets when the SJB detects a short to voltage from the stoplamp switch input circuit.
- DTC B2045 (Left Rear Stop Lamp Circuit Open) - an on-demand DTC that sets when the SJB detects a short to voltage from the LH rear stop/turn lamp output circuit.
- DTC B2047 (Right Rear Stop Lamp Circuit Open) - an on-demand DTC that sets when the SJB detects a short to voltage from the RH rear stop/turn lamp output circuit.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Stoplamp switch
- PCM
- SJB