LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1483 (Exterior Lighting System) >> Diagnosis And Testing >> Stoplamps >> Pinpoint Tests >> Pinpoint Test I: All The Stoplamps Are Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The stoplamp switch is supplied voltage from the Smart Junction Box (SJB) fuse 2 (15A). When the brake pedal is applied, the stoplamp switch routes voltage to the stoplamps and the SJB.

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals