LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1472 (Steering System - Electronic Power Assist Steering (EPAS)) >> Interactive Diagnostics >> DTC / Symptom Selection >> DTC Index - Power Steering Control Module (PSCM) >> DTC C200C: Steering Shaft Torque Sensor 2 >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

When this DTC is set the PSCM will remove steering assist, enter into a manual mode and transmit an invalid steering column torque message over the HS-CAN bus.

The PSCM will send a message to the IPC to display the POWER STEERING ASSIST FAULT message in the message center.