Normal Operation
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Under normal operation, a 5-volt reference voltage is supplied to the sensors and actuators from the HVAC module through circuit LH111 (BN/WH).
- DTC C1B14:11 (Sensor Supply Voltage A: Circuit Short to Ground) - The module senses less than 0.1 volt on the sensor reference voltage circuit, indicating a short directly to ground.
- DTC C1B14:12 (Sensor Supply Voltage A: Circuit Short to Battery) - The module senses greater than 4.9 volts on the sensor reference voltage circuit, indicating a short directly to voltage.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- HVAC module