LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1456 (Manual Transaxle And Clutch - General Information) >> Diagnosis And Testing >> Manual Transaxle and Clutch >> Pinpoint Tests >> Pinpoint Test A: Clutch Pedal Pulsation >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Clutch pedal feel should be smooth when disengaging and engaging the clutch. Clutch pedal movement is transmitted by hydraulic fluid pressure, which actuates the clutch release fork and bearing. The clutch release fork and bearing pushes on the spring center towards the flywheel. The diaphragm spring pivots at the fulcrum, relieving the load on the clutch pressure plate. Steel spring straps riveted in the clutch pressure plate cover pull the clutch pressure plate from the clutch disc, disengaging the engine torque from the transmission.

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals