LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Engine Controls - Diagnostic Subroutines -- 6.0L Diesel (99P F450/550)) >> Hard Start/No Start Diagnostic Procedures >> 10b and 10c. Check FICM Power During Cranking >> Purpose: >> Diagnostic Tool - Data List Monitoring

Diagnostic Tool - Data List Monitoring

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2005 Ford RV Cutaway, 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: You may need to use an outside power source for the diagnostic tool.
Parameter Specification Measurement
FICMLPWR(1) 8 volts minimum  
FICMVPWR(2) 8 volts minimum  
(1) No or low voltage indicated could be caused by a 12-way connector issue or logic power fuse. GO to PINPOINT TEST S .

(2) No or low voltage indicated could be caused by a 12-way connector issues.